|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|
FL Sensor Weight Information |
Front left sensor weight information |
Min.: -75.852 kg (-167.223 lb) Max.: 104.737 kg (230.903 lb) |
Current value displayed |
- |
| RL Sensor Weight Information |
Rear left sensor weight information |
Min.: -75.852 kg (-167.223 lb) Max.: 104.737 kg (230.903 lb) |
Current value displayed |
- |
| Total Weight Information |
Total weight information |
Min.: -151.704 kg (-334.446 lb) Max.: 209.475 kg (461.808 lb) |
Current value displayed |
- |
| Weight Forward and Rearward Difference |
Weight difference between front and rear |
Min.: -180.589 kg (-398.126 lb) Max.: 180.589 kg (398.126 lb) |
Current value displayed |
- |
| Airbag Total Weight |
Total weight information for airbag system |
Min.: -161.595 kg (-356.252 lb) Max.: 226.017 kg (498.277 lb) |
Current value displayed |
- |
| Belt Warning Total Weight |
Total weight information for seat belt warning system |
Min.: -155.001 kg (-341.715 lb) Max.: 219.400 kg (483.689 lb) |
Current value displayed |
- |
| VSC Status |
Vehicle speed status | ON or OFF |
ON: Vehicle speed valid |
- |
| VSC Vehicle Speed |
Vehicle speed | Min.: 0.00 km/h (0.00 mph)
Max.: 327.67 km/h (203.61 mph) |
Current value displayed |
- |
| VSC Zero Point1 |
Zero point for acceleration sensor 1 |
Min.: -4.5952 m/s2 Max.: 4.5593 m/s2 |
Current value displayed |
- |
| VSC Zero Point2 |
Zero point for acceleration sensor 2 |
Min.: -4.5952 m/s2 Max.: 4.5593 m/s2 |
Current value displayed |
- |
| VSC Calibration Status |
Vehicle stability control calibration status |
Calibrated or Uncalibrated |
Calibrated | - |
|
VSC Assembly Information |
Acceleration sensor information |
Reverse Position or Normal Position |
Reverse Position or Normal Position |
Displays a fixed value for each vehicle. |
|
Yaw Rate/G Sensor Voltage Invalid Flag |
Yaw rate and acceleration sensor voltage invalid flag |
ON or OFF | ON: Valid |
- |
| Yaw Rate/G Sensor Malfunction Flag1 |
Malfunction flag for acceleration sensor 1 |
OK or NG | OK |
- |
| Yaw Rate/G Sensor Invalid Flag1 |
Invalid flag for acceleration sensor 1 |
ON or OFF | ON: Valid |
- |
| Yaw Rate/G Sensor Malfunction Flag2 |
Malfunction flag for acceleration sensor 2 |
OK or NG | OK |
- |
| Yaw Rate/G Sensor Invalid Flag2 |
Invalid flag for acceleration sensor 2 |
ON or OFF | ON: Valid |
- |
| Yaw Rate/G Sensor Assembly Information |
Acceleration sensor information for occupant classification system |
Unset, Reverse Position or Normal Position |
Reverse Position or Normal Position |
- Displays a fixed value for each vehicle.
- "Unset" will be displayed for approximately 2 seconds after the engine switch is turned on (IG).
|
| Passenger Detection(Airbag) |
Front passenger classification |
OFF/Child, CRS1, CRS2, AF05 or AM50 |
OFF/Child: Vacant or child is seated CRS1: Child restraint system is installed
CRS2: Child restraint system is installed AF05: Adult is seated
AM50: Adult is seated |
- |
| Passenger Detection(Belt Warning) |
Front passenger detection for seat belt warning system |
OFF, Baggage or ON | OFF: Seat is vacant
Baggage: Seat is occupied by baggage ON: Seat is occupied |
- |
| Driving Status |
Driving status | Stop, Drive or Turn |
Stop: Vehicle is stopped Drive: Vehicle is being driven straight
Turn: Vehicle is turning |
- |
| Passenger Buckle SW |
Front passenger side buckle switch |
NG, Set or Unset | Set: Front passenger seat belt is fastened
Unset: Front passenger seat belt is not fastened |
"NG" will be displayed immediately after the engine switch is turned on (IG). |
|
The Number of DTCs | Number of DTC recorded |
Min.: 0, Max.: 255 | 0 |
The number displayed is the total current DTCs and history DTCs stored (excluding duplicates). |
