Emergency flashers
The emergency flashers are used to warn other drivers when the
vehicle has to be stopped on the road due to a breakdown, etc.
Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. ■Emergency flashers
If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the following
procedure:
1. Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle. 2. Shift the shift lever to N. If the shift lever is shifted to N 3. After slowing down, stop the vehicle in a safe place by the road. 4. Stop the engine. If the shift lever cannot be shifted to N 3. Keep depressing the brake pedal with both feet to reduce vehicle speed as much as possible. 4. To stop the engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession. 5. Stop the vehicle in a safe place by the road.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Intelligent Clearance Sonar System(for Gasoline Model): Blind Spot Monitor Beam Axis Misalignment (C1AFA)
DESCRIPTION This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating blind spot monitor beam axis misalignment. DTC No. Detection Item DTC Detection Condition Trouble Area C1AFA Blind Spot Monitor Beam Axis Misal ...