INSTALLATION PROCEDURE 1. INSTALL DRIVING SUPPORT ECU ASSEMBLY (a) Connect the connector. (b) Engage the guide. (c) Install the driving support ECU assembly with the nut. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} NOTICE: If the driving support ECU assembly has been struck or dropped, replace the driving support ECU assembly with a new one. 2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Frame Wire: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during HV floor under wire removal/installation are shown below. Necessary Procedures After Parts Removed/Insta ...
