CHECK FOR INTERMITTENT PROBLEMS CHECK FOR INTERMITTENT PROBLEMS (a) Perform a simulation test. (1) For the simulation test, reproduce the driving conditions that were present when the problem occurred. These conditions should be based on the customer's comments and freeze frame data that is recorded with DTCs, such as the opening angle of the accelerator pedal, SOC (state of charge), engine coolant temperature, engine speed, and generator (MG1) / motor (MG2) rpm and torque. Click here (b) Check the connector(s) and terminal(s). Click here
(c) Wiggle the harness and connector(s). Click here (d) Heat or cool suspected parts. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting (int): Vanity Light Bulb
ReplacementREPLACEMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE FRONT LENS HOLDER LH (a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and guide to remove the ...
