INSPECTION PROCEDURE 1. INSPECT STEERING PAD SWITCH ASSEMBLY (a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT: If the result is not as specified, replace the steering pad switch assembly. (b) Check the illumination.
(1) Connect a positive (+) lead from the auxiliary battery to terminal 1 (ILL+2) and a negative (-) lead to terminal 6 (ILL-2) of the steering pad switch assembly connector. (2) Check that the steering pad switch assembly illumination illuminates. OK: The steering pad switch assembly illumination illuminates. HINT: If the result is not as specified, replace the steering pad switch assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) (P012800,P012807)
DESCRIPTION The ECM uses the engine coolant temperature sensor, installed to the water outlet, and the No. 2 engine coolant temperature sensor, installed to the radiator pipe assembly, to monitor the operation of the thermostat. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory ...