INSTALLATION PROCEDURE 1. INSTALL STEERING PAD SWITCH ASSEMBLY (a) Engage the 4 claws and 3 pins to install the steering pad switch assembly. (b) Install the 2 screws. (c) Connect the steering pad switch connector to the spiral cable with sensor sub-assembly. 2. INSTALL HORN BUTTON ASSEMBLY Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Drive Shaft Assembly: Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. SEPARATE FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP (a) Secure the drive shaft in a vise between aluminum plates. NOTICE: Do not overtighten the vise. ...
