Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Exterior / Door / Hatch / Fuel Lid Opener Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT FUEL LID OPENER SWITCH

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 5

Pressed (On)

Below 1 Ω

2 - 5

Not pressed (Off)

10 kΩ or higher

If the result is not as specified, replace the fuel lid opener switch.

*a

Component without harness connected

(Fuel Lid Opener Switch)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the fuel lid opener switch illuminates.

OK:

Auxiliary Battery Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6

Auxiliary battery negative (-) → Terminal 1

Illumination illuminates

If the result is not as specified, replace the fuel lid opener switch.

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Charging System: Freeze Frame Data
    FREEZE FRAME DATA DESCRIPTION The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, whethe ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0137