DISASSEMBLY PROCEDURE 1. REMOVE HOOD TO RADIATOR SUPPORT SEAL
(b) Remove the 10 hood to radiator support seal clips from the hood to radiator support seal. 2. REMOVE HOOD INSULATOR
(b) Disengage the 2 guides to remove the hood insulator as shown in the illustration. 
3. REMOVE WASHER NOZZLE SUB-ASSEMBLY Click here 4. DISCONNECT WASHER HOSE ASSEMBLY
(b) Disengage the grommet to disconnect the washer hose assembly. 5. REMOVE HOOD SUPPORT ASSEMBLY LH Click here 6. REMOVE HOOD STAY BRACKET LH Click here 7. REMOVE HOOD SUPPORT ASSEMBLY RH HINT: Use the same procedure as for the LH side. 8. REMOVE HOOD STAY BRACKET RH HINT: Use the same procedure as for the LH side. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Ground (P012011)
DESCRIPTION The throttle position sensor is built into the throttle body with motor assembly and detects the opening angle of the throttle valve. This sensor is a non-contact type sensor. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at h ...
