|
Function | Outline |
|
Manual slide open and close function |
This
function causes the sliding roof to open (or close) when the OPEN
switch (or CLOSE switch) is pressed for a maximum of 0.3 seconds. The
sliding roof stops as soon as the switch is released. |
|
Auto slide open and close function | This
function causes the sliding roof to reach the comfort stop position or
fully open (or fully close) when the OPEN switch (or CLOSE switch) is
pressed for a minimum of 0.3 seconds. |
|
Manual tilt up and down function | This
function causes the sliding roof to tilt up (or tilt down) when the UP
switch (or DOWN switch) is pressed for a maximum of 0.3 seconds. The
sliding roof stops as soon as switch is released. |
|
Auto tilt up and down function | This
function causes the sliding roof to fully tilt up (or tilt down) when
the UP switch (or DOWN switch) is pressed for a minimum of 0.3 seconds. |
|
Jam protection function | The
jam protection function automatically stops the sliding roof and moves
it open halfway (or fully tilt up) if foreign matter gets jammed in the
sliding roof during close or tilt down operation. |
|
Key-off operation function | The
key-off operation function makes it possible to operate the sliding
roof for approximately 45 seconds after the power switch is turned from
on (IG) to off, if both the driver door and front passenger door are not
opened. |
| Key-linked function* |
- When the electrical key transmitter sub-assembly is not in the vehicle,
the driver door is unlocked, and the driver door key cylinder is turned
and held in the unlock position for 2.5 seconds or more, the sliding
roof ECU (sliding roof drive gear assembly) activates the sliding roof
motor to open the sliding roof while the key cylinder is turned.
- When the electrical key transmitter sub-assembly is not in the vehicle,
the driver door is locked, and the driver door key cylinder is turned
and held in the lock position for 2.5 seconds or more, the sliding roof
ECU (sliding roof drive gear assembly) activates the sliding roof motor
to close the sliding roof while the key cylinder is turned.
HINT: This function is linked with the power window key-linked function. |
|
Wireless transmitter-linked function* |
When
the main body ECU (multiplex network body ECU) receives an unlock
signal from the electrical key transmitter sub-assembly continuously for
longer than 4 seconds, the sliding roof ECU (sliding roof drive gear
assembly) activates the sliding roof motor to open the sliding roof
while the switch of the electrical key transmitter sub-assembly is being
pressed. HINT: This function is linked with the power window wireless transmitter-linked function. |
|
Sliding roof open warning function | When
the power switch is turned from on (IG) and the driver door is opened
with the sliding roof open, the buzzer in the combination meter assembly
sounds once and a warning message is displayed on the multi-information
display. |
