Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Lighting (int) / Ambient Light / Inspection

INSPECTION

PROCEDURE

1. INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

(a) Apply auxiliary battery voltage to the No. 2 interior illumination light sub-assembly and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → 1 (+)

Auxiliary battery negative (-) → 2 (-)

Ambient light illuminates

If the result is not as specified, replace the No. 2 interior illumination light sub-assembly.

*a

Component without harness connected

(No. 2 Interior Illumination Light Sub-assembly)

2. INSPECT NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

(a) Apply auxiliary battery voltage to the No. 3 interior illumination light sub-assembly and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → 1 (+)

Auxiliary battery negative (-) → 2 (-)

Ambient light illuminates

If the result is not as specified, replace the No. 3 interior illumination light sub-assembly.

*a

Component without harness connected

(No. 3 Interior Illumination Light Sub-assembly)

3. INSPECT NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

(a) Apply auxiliary battery voltage to the No. 4 interior illumination light sub-assembly and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → 1 (+)

Auxiliary battery negative (-) → 2 (-)

Ambient light illuminates

If the result is not as specified, replace the No. 4 interior illumination light sub-assembly.

*a

Component without harness connected

(No. 4 Interior Illumination Light Sub-assembly)
    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Steering Gear(for Hv Model): Installation
    INSTALLATION PROCEDURE 1. INSTALL TIE ROD ASSEMBLY LH (a) Install the lock nut and tie rod assembly LH to the rack and pinion power steering gear assembly until the matchmarks are aligned. HINT: After adjusting the toe-in, tighten the lock nut. *a Matchmark 2. INSTALL TIE ROD ASSEMBLY RH HINT: Perfo ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0123