INSTALLATION PROCEDURE 1. INSTALL NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) Engage the 2 guides to install the No. 3 interior illumination light sub-assembly. 2. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) Engage the 2 guides to install the No. 2 interior illumination light sub-assembly. 3. INSTALL NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) for Front Side: (1) Engage the guide as shown in the illustration to install the No. 4 interior illumination light sub-assembly. 
(b) for Rear Side: (1) Engage the guide as shown in the illustration to install the No. 4 interior illumination light sub-assembly. 
4. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY (a) Install the instrument panel cup holder assembly with the 7 screws. 5. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Click here
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Seat Heater System(for Hv Model): Front Left Seat Heat Sensor Circuit (B14C1)
DESCRIPTION Output to the front seat cushion heater temperature sensor stops if one of the following occurs: 1) the temperature sensor is open or shorted; or 2) the temperature sensor is damaged and its output value does not change. DTC No. Detection Item DTC Detection Condition Trouble Area B14C1 F ...
