Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Other System Malfunction (C1A63)

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Pre-collision / Pre-collision System(for Gasoline Model) / Other System Malfunction (C1A63)

DESCRIPTION

The driving support ECU assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system, the driving support ECU assembly is notified via CAN communication and stores DTC C1A63.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A63

Other System Malfunction

With the engine switch on (IG), the driving support ECU assembly receives an accelerator pedal sensor malfunction signal from the ECM for approximately 2 seconds or more.

SFI system

PROCEDURE

1.

GO TO SFI SYSTEM

HINT:

If DTC C1A63 is output by the pre-collision system, perform troubleshooting for the SFI system.

Click here

NEXT

END
    Brake System Malfunction (C1A50)

    Brake Control Signal Mismatch (C1A64)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Steering System(for Gasoline Model): Terminals Of Ecu
    TERMINALS OF ECU TERMINALS OF ECU *a Component without harness connected (Rack and Pinion Power Steering Gear Assembly) - - HINT: The rack and pinion power steering gear assembly uses waterproof connectors. Therefore, voltage or waveforms cannot be checked with the connectors connected to the vehicl ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0323