DESCRIPTION The skid control ECU (brake actuator assembly) sends signals to the driving support ECU assembly according to the brake control status. If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly), it will store DTC C1A64.
CAUTION / NOTICE / HINT NOTICE: The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here
PROCEDURE
HINT: If DTC C1A64 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Safety Connect System(for Gasoline Model): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected ...
