Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Front Camera Module Beam Axis Not Adjusted (C1AA9)

DESCRIPTION

If forward recognition camera adjustment has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 will be stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA9

Front Camera Module Beam Axis Not Adjusted

When the pre-collision system is on, the driving support ECU assembly detects that forward recognition camera adjustment has not been completed for 0.3 seconds or more.

Front camera system

PROCEDURE

1.

GO TO FRONT CAMERA SYSTEM

HINT:

If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the front camera system.

Click here

NEXT

END

    Front Camera Module Circuit (C1AA0)

    Heater Circuit (C1AAE)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Throttle/Pedal Position Sensor "A" Minimum Stop Performance (P210900)
    DESCRIPTION The idle speed is controlled by the Electronic Throttle Control System (ETCS). The ETCS is comprised of a throttle actuator, which operates the throttle valve, and a throttle position sensor, which detects the opening amount of the throttle valve. The ECM controls the throttle actuator t ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.029