|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|
Turn Light RH | Turn signal switch (right) status |
ON or OFF | ON: Turn signal switch (right) on
OFF: Turn signal switch (right) off |
- |
| Turn Light LH |
Turn signal switch (left) status |
ON or OFF | ON: Turn signal switch (left) on
OFF: Turn signal switch (left) off |
- |
| PCS OFF Switch |
Pre-collision system on/off status |
ON or OFF | ON: Pre-collision system on
OFF: Pre-collision system off |
- |
| Pre-Collision Safety Warning Buz |
Pre-collision system warning buzzer |
Valid or Inval | Valid: Pre-collision system warning buzzer operation possible
Inval: Pre-collision system warning buzzer operation not possible |
- |
| Pre-Collision Brake |
Pre-collision braking function |
Valid or Inval | Valid: Pre-collision braking operation possible
Inval: Pre-collision braking operation not possible |
- |
| PBA Start |
Pre-collision brake assist activation signal |
OFF, Standby, Assist Lv1 or Assist Lv2 |
OFF: Pre-collision brake assist not operating Standby: Brake pedal not depressed during pre-collision brake assist operation
Assist Lv1: Brake pedal depressed during pre-collision brake assist operation
Assist Lv2: Brake pedal firmly depressed during pre-collision brake assist operation |
Signal
status changes when the pre-collision brake assist is activated before a
crash (Pre-collision brake will activate only in situations where the
driver depresses the brake pedal) |
|
Warning Brake | - |
- | - |
Not applicable to the vehicle |
|
Brake Assist Standby |
- | - |
- | This item is displayed on the Techstream but is not used. |
|
Pre-Collision Brake Control |
Pre-collision braking operational status |
ON or OFF | ON: Pre-collision braking operating
OFF: Pre-collision braking not operating |
- |
| AVS Start |
- | - |
- | This item is displayed on the Techstream but is not used. |
|
VGRS Start | - |
- | - |
This item is displayed on the Techstream but is not used. |
|
PBA Control | Pre-collision brake assist operational status |
Valid or Invalid | Valid: Pre-collision brake assist control operation possible
Invalid: Pre-collision brake assist control operation not possible |
- |
| Pre-Collision Safety Brake Ind |
Pre-collision system alarm warning message status |
ON or OFF | ON: Displayed
OFF: Not displayed | "BRAKE!" is displayed |
|
PCS Crash Alarm Buzzer |
PCS meter buzzer status |
ON or OFF | ON: PCS meter buzzer sounding
OFF: PCS meter buzzer not sounding |
- |
| Front Radar-Low Voltage History |
Millimeter wave radar sensor assembly low voltage history |
ON or OFF | ON: History of low voltage
OFF: No history of low voltage |
- |
| Front Radar-Incorrect Axial Gap (Vertical) History |
Millimeter wave radar sensor assembly vertical misalignment history |
ON or OFF | ON: History of vertical misalignment
OFF: No history of vertical misalignment |
- |
| Front Radar-Incorrect Axial Gap (Horizontal) History |
Millimeter wave radar sensor assembly horizontal misalignment history |
ON or OFF | ON: History of horizontal misalignment
OFF: No history of horizontal misalignment |
- |
| Front Recognition Camera-Malfunction History |
Front camera system unavailable history |
ON or OFF | ON: History of unavailable
OFF: No history of unavailable |
- |
| Control Mode |
ECU control mode status |
Normal or Check Mode | Normal: Normal operation
Check Mode: Operating in Control Mode |
- |
| PCS Operation State Retention Setting |
PCS Operation State Retention Setting customize setting |
ON or OFF | ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 1 |
PCS Alarm Activation Distance Retention Setting 1 customize setting |
ON or OFF | ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 2 |
PCS Alarm Activation Distance Retention Setting 2 customize setting |
ON or OFF | ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 3 |
PCS Alarm Activation Distance Retention Setting 3 customize setting |
ON or OFF | ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
