Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Driving Support ECU (C1A01)

DESCRIPTION

The driving support ECU assembly uses the millimeter wave radar sensor assembly to detect objects in front of the vehicle.

Based on signals from the millimeter wave radar sensor assembly, the driving support ECU assembly calculates the possibility of a collision and operates the pre-collision system if it determines that the possibility is high.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A01

Driving Support ECU

When the power switch is on (IG), the driving support ECU assembly detects an internal malfunction for approximately 1 second.

Driving support ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.

PROCEDURE

1.

REPLACE DRIVING SUPPORT ECU ASSEMBLY

(a) Replace the driving support ECU assembly.

Click here

NEXT

END

    Front Radar Sensor Region Code Mismatch (C1A0A)

    Vehicle Information Not Obtained (C1A02)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Motor Generator Control System: Drive Motor "A" Execution Torque Performance (P0C1900)
    DTC SUMMARY MALFUNCTION DESCRIPTION This DTC indicates that the motor torque execution value does not correspond to the torque command value sent from the hybrid vehicle control ECU to the motor (MG2). The cause of this malfunction may be one of the following: Area Main Malfunction Description Insid ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0183