Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Seat Belt / Rear Seat Inner Belt Assembly(for Rh Side) / Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for Gasoline Model)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 - 4

Rear RH seat belt unfastened

Below 1 Ω

If the result is not as specified, replace the rear seat inner with center belt assembly RH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly RH)

2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for HV Model)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 - 3

Rear RH seat belt unfastened

Below 1 Ω

If the result is not as specified, replace the rear seat inner with center belt assembly RH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly RH)
    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Cylinder Head: Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for bank 1 and bank 2. The following procedure is for bank 2. PROCEDURE 1. INSTALL SPARK PLUG TUBE HINT: When using a new cylinder head LH, the spark plug tubes must be replaced. (a) Apply adhesive to a new spark plug tube as shown in t ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0112