Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

PROCEDURE

1.	VEHICLE BROUGHT TO WORKSHOP

2.	CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer to confirm the problem.

Click here

PRE-CHECK

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

4.	CHECK FOR DTC*

(a) Clear the DTCs.

Body Electrical > Air Conditioner > Clear DTCs

(b) Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes

Result	Proceed to
DTCs are not output	A
Air conditioning system DTCs are output	B
Seat heater system DTCs are output	C

GO TO AIR CONDITIONING SYSTEM

GO TO DIAGNOSTIC TROUBLE CODE CHART

5.	PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result	Proceed to
Fault is not listed in Problem Symptoms Table	A
Fault is listed in Problem Symptoms Table	B

GO TO STEP 7

6.	OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) Terminals of ECU

Click here

(d) Inspection

7.	REPAIR OR REPLACE

8.	CONFIRMATION TEST

END

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Repair Instruction: Inspection Mode Procedure
INSPECTION MODE PROCEDURE INSPECTION MODE (for HV Model) NOTICE: When operating the vehicle in an inspection mode for an operation such as a speedometer test, a DTC may be stored. Therefore, if the warning light illuminates, check for DTCs using the Techstream and clear the DTCs. HINT: If the engine ...

Toyota Avalon (XX50) 2019-2022 Owners Manual