INSTALLATION PROCEDURE 1. INSTALL TELEPHONE AND GPS ANTENNA CORD (for Front Side) (a) Connect the 3 connectors to install the telephone and GPS antenna cord. (b) Engage the clamp. 2. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (for Front Side) Click here 3. INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY (for Front Side) Click here 4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Front Side) Click here 5. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL (for Front Side) Click here 6. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for Front Side) Click here 7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Front Side) Click here 8. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY (for Front Side) Click here 9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (for Front Side) Click here 10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH (for Front Side) Click here 11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (for Front Side) Click here 12. INSTALL TELEPHONE AND GPS ANTENNA CORD (for Roof Side) (a) Engage the 4 clamps. (b) Connect the connector to install the telephone and GPS antenna cord. 13. INSTALL ROOF HEADLINING ASSEMBLY (for Roof Side) Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Dynamic Radar Cruise Control System(for Gasoline Model): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the ECM, refer to Registration. Click here When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving suppor ...
