CUSTOMIZE PARAMETERS CUSTOMIZE SMART KEY SYSTEM (for Entry Function, Gasoline Model)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT: The following items can be customized. (a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3. (2) Turn the engine switch on (IG).
(3) Turn the Techstream on. (4) Enter the following menus: Customize Setting / Smart Key / Access or Warning.
(5) Select the setting by referring to the table below. Smart Key / Access
|
Tester Display | Description |
Default | Setting |
ECU | | Park Wait Time |
Function
that sets the period of time (lock confirmation time) that the door is
prevented from being unlocked by operating the front door outside handle
assembly or rear door outside handle assembly after an entry lock
operation is performed. | 2.5s |
00:0.5s,01:1.5s,10:2.5s,11:5s |
Certification ECU (Smart key ECU assembly) | |
Ignition Available Area |
Function that sets the area that the key must be in before the engine switch can be operated. |
All | 00:Front,01:All |
Certification ECU (Smart key ECU assembly) | |
Trunk Open Mode | Function
that opens the luggage compartment door when the user is carrying the
electrical key transmitter sub-assembly and presses the luggage
electrical key switch. | ON |
0:OFF,1:ON | Certification ECU (Smart key ECU assembly) | |
Door Unlock Mode2 | Function that sets which doors are unlocked by the entry unlock function. |
All | 0:All,1:Driver |
Certification ECU (Smart key ECU assembly) | |
Touch Activation Over Threshold |
Function
that limits the number of times the entry lock function can be operated
consecutively. When set to Not Active entry lock function can be
operated an unlimited number of times consecutively. |
Active | 0:Active,1:Not Active |
Certification ECU (Smart key ECU assembly) | |
Door Unlock Sensor Touch Time Adjust |
Function
that sets the length of time the unlock sensor on the door outside
handle assembly (for driver door) must be touched to unlock all of the
doors | Middle |
00:OFF,01:Short,10:Middle,11:Long |
Certification ECU (Smart key ECU assembly) | Warning
|
Tester Display | Description |
Default | Setting |
ECU | | Key Low Battery Warning |
Enables
or disables the sounding of the buzzer when the transmitter battery is
low and the engine switch is turned off after being on (IG) for 20
minutes or more. | ON |
0:OFF,1:ON | Certification ECU (Smart key ECU assembly) |
(b) Customizing with the multi-display (1) Turn the engine switch on (IG).
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below. |
Display | Description |
Default | Setting |
Relevant ECU | | Select Doors to Unlock |
Function that sets which doors are unlocked by the entry unlock function. |
All Doors | All Doors or Driver's Door |
Certification ECU (Smart key ECU assembly) |
(c) Entry unlock mode change function (manual operation) (1) The following entry unlock modes can be selected when using the entry unlock mode change function.
- All door unlock mode: When the unlock sensor of a front door outside
handle assembly or rear door outside handle assembly is touched, all of
the doors are unlocked simultaneously.
- Driver door unlock mode: When the unlock sensor of the front door
outside handle assembly (for driver door) is touched, only the driver
door is unlocked. If any other door door outside handle assembly is
touched, all of the doors are unlocked simultaneously.
(2) When customizing through manual operation:
- Turn the engine switch off.
- Check that the LED of the electrical key transmitter sub-assembly is not
illuminated, and then press and hold the lock and unlock switches of
the electrical key transmitter sub-assembly for 5 seconds or more while
the electrical key transmitter sub-assembly is in the exterior detection
area.
- Check the current setting.
HINT:
- The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.
- The answer-back (wireless buzzer, buzzer in the combination meter
assembly) operation for each mode is indicated in the table below.
|
Currently Selected Mode |
Answer-back (Wireless Buzzer) |
Answer-back (Buzzer in Combination Meter Assembly)
|
|
All door unlock mode |
Buzzer sounds twice (short beeps) |
Buzzer sounds once |
|
Driver door unlock mode |
Buzzer sounds 3 times (short beeps) |
Buzzer sounds once |
- Release the lock and unlock switches of the electrical key transmitter sub-assembly.
- Check that the LED of the electrical key transmitter sub-assembly is not
illuminated, and then press and hold the lock and unlock switches of
the electrical key transmitter sub-assembly for 5 seconds or more to
change the mode.
HINT:
Repeat the procedure as necessary to select the desired mode.
- Unlock the doors using the wireless function, and then open any door.
(d) Entry cancel function (manual operation) HINT: While
the smart key system is canceled, it is possible to lock and unlock the
doors with the wireless function, and the engine can be started by
holding the electrical key transmitter sub-assembly near the engine
switch. (1) The following functions are disabled when the smart key system is canceled.
- Entry unlock/lock functions
- Push-button start function
- Key lock-in prevention function
- Entry warning functions
(2) When canceling the smart key system through manual operation:
- Make sure the following conditions are met:
- The engine switch is off.
- The driver door is closed.
- The driver door is unlocked.
(3) Press the unlock switch of the electrical key transmitter sub-assembly.
(4) Open the driver door within 5 seconds of completing the step above (driver door: closed → opened).
(5)
With the driver door open, press the unlock switch of the electrical
key transmitter sub-assembly 2 times within 5 seconds of completing the
step above. NOTICE: If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
(6) Perform the following procedure within 30 seconds of completing the step above.
- Close and open the driver door twice (driver door: open → closed → opened → closed → opened).
- With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.
NOTICE:
If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
- Close and open the driver door (driver door: open → closed → opened).
(7) Close the driver door within 5 seconds (driver door: open → closed).
(8) Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart key system has been canceled.
(9) Perform the following procedure to restore the smart key system to the active state from the canceled state.
- Perform the procedure to cancel the smart key system again.
- Check that the wireless buzzer sounds once (short beep) to confirm that
the smart key system has been restored to the active state.
HINT:
- The system changes between the canceled state and the active state each
time the procedure to cancel the system through manual operation is
performed.
- The buzzer sounds twice when the system changes from the active state to
the canceled state, and sounds once when the system changes from the
canceled state to the active state.
| 
