ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the rear seat 3 point type belt assembly. PROCEDURE 1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here
for Gasoline Model: Click here
(b) Visually check for defects with the rear seat 3 point type belt assembly installed to the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the rear seat 3 point type belt assembly with a new one. 2. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here
for Gasoline Model: Click here
(b) Visually check for defects with the rear seat 3 point type belt assembly removed from the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the rear seat 3 point type belt assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Panoramic View Monitor System(for Gasoline Model): Steering Angle Initialization Incomplete (C1694)
DESCRIPTION This DTC is stored when the parking assist ECU judges that the maximum steering angle has not been memorized (steering angle setting is incomplete). This DTC is stored when the television camera assembly judges that the maximum steering angle has not been memorized (steering angle settin ...
